| Hybrid ball bearing (pcs) | 3 |
| Lifetime lubricated | maintenance free |
| Motor technology |
3-phase asynchronous drive (no brushes or sensors) |
| Frequency | 500 Hz |
| Motor poles (pairs) | 1 |
| Rated Rotation Speed | 30,000 rpm |
| Rated Power (Pmax/5s) | 7.5 kW |
| Rated Power (S6-60%) | 4.5 kW |
| Rated Power (S1-100%) | 3.3 kW |
| Voltage (Pmax/5s) | 380 V |
| Voltage (S6-60%) | 380 V |
| Voltage (S1-100%) | 380 V |
| Current (Pmax/5s) | 19 A |
| Current (S6-60%) | 9.1 A |
| Current (S1-100%) | 6.8 A |
| Motor protection | PTC 130°C |
| Housing | Aluminium |
| Housing diameter | 100 mm |
| Cooling |
Fan-cooled (impeller on shaft) |
| Heat dissipation | Via the housing |
| Housing temperature | <+ 55° C |
| Ambient temperature | + 10°C … + 45°C |
| Sealing Air | yes |
| Protection category | IP54 |
| Taper Cleaning | yes |
| Tool Change | Pneumatic taper change |
| Tool Holder | HSK-E 32 |
| Clamping range | 13 mm |
| Direction of motion | Clockwise |
| Coupler plug | 9-pin (SpeedTEC) |
| Weight | 9.4 kg |
| Concentricity | <2 µ |
| Axial run-out | <2 µ |
